RSMX / RSMX-T

RSMX / RSMX-T
3-PIECE, HIGH STRENGTH - HEAVY DUTY SHANK / PTFE LINERS AVAILABLE

MATERIALS

BALL

52100 Steel
Rc 56 MIN.
HARD CHROME PLATED

RACE

STEEL ALLOY
HEAT TREATED
ZINC PLATED
CHROMATE TREATED

BODY

LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED

MALE ROD ENDS		B DIA.	D DIA.	W WIDTH	T WIDTH	BALL DIA.	A LGTH	N THD.	C LGTH	a MIS. ANGLE	ULT. STATIC RADIAL LOAD (lbs)	APPROX. WEIGHT (lbs)
RIGHT HAND PART NO.	LEFT HAND PART NO.	+.0015 -.0005	+.010 -.010	+.000 -.005	+.005 -.005	REF.	+.015 -.015	UNF 3A	+.062 -.031	REF.	ULT. STATIC RADIAL LOAD (lbs)	APPROX. WEIGHT (lbs)
RSMX3	RSMXL3	.1900	.750	.312	.250	.437	1.562	1/4-28	1.000	10	5,270	.043
RSMX4	RSMXL4	.2500	.875	.375	.281	.500	1.875	5/16-24	1.250	13	8,471	.072
RSMX5	RSMXL5	.3125	1.000	.437	.344	.625	1.938	3/8-24	1.250	12	13,012	.112
RSMX6	RSMXL6	.3750	1.125	.500	.406	.719	2.125	7/16-20	1.375	10	17,610	.160
RSMX7	RSMXL7	.4375	1.312	.562	.437	.812	2.438	1/2-20	1.500	12	23,470	.249
RSMX8	RSMXL8	.5000	1.500	.625	.500	.937	2.625	5/8-18	1.625	10	31,420	.382
RSMX10-8	RSMXL10-8	.5000	1.750	.750	.562	1.125	2.875	3/4-16	1.750	13	40,590	.602
RSMX10	RSMXL10	.6250	1.750	.750	.562	1.125	2.875	3/4-16	1.750	13	40,590	.602
RSMX12	RSMXL12	.7500	2.000	.875	.687	1.312	3.375	7/8-14	1.875	12	55,696	.918

MATERIALS

BALL

52100 Steel
Rc 56 MIN.
HARD CHROME PLATED

RACE

STEEL ALLOY
HEAT TREATED
ZINC PLATED
CHROMATE TREATED

BODY

LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED

LINER

*TEFLON FABRIC

MALE ROD ENDS		B DIA.	D DIA.	W WIDTH	T WIDTH	BALL DIA.	A LGTH	N THD.	C LGTH	a MIS. ANGLE	ULT. STATIC RADIAL LOAD (lbs)	APPROX. WEIGHT (lbs)
RIGHT HAND PART NO.	LEFT HAND PART NO.	+.0015 -.0005	+.010 -.010	+.005 -.005	+.005 -.005	REF.	+.015 -.015	UNF 3A	+.062 -.031	REF.	ULT. STATIC RADIAL LOAD (lbs)	APPROX. WEIGHT (lbs)
RSMX3T	RSMXL3T	.1900	.750	.312	.250	.437	1.562	1/4-28	1.000	10	5,270	.043
RSMX4T	RSMX4LT	.2500	.875	.375	.281	.500	1.875	5/16-24	1.250	13	8,471	.072
RSMX5T	RSMX5LT	.3125	1.000	.437	.344	.625	1.938	3/8-24	1.250	12	13,012	.112
RSMX6T	RSMX6LT	.3750	1.125	.500	.406	.719	2.125	7/16-20	1.375	10	17,610	.160
RSMX7T	RSMX7LT	.4375	1.312	.562	.437	.812	2.438	1/2-20	1.500	12	23,470	.249
RSMX8T	RSMX8LT	.5000	1.500	.625	.500	.937	2.625	5/8-18	1.625	10	31,420	.382
RSMX10-8T	RSMX10-8T	.6250	1.750	.750	.562	1.125	2.875	3/4-16	1.750	13	40,590	.602
RSMX10T	RSMX10T	.6250	1.750	.750	.562	1.125	2.875	3/4-16	1.750	13	40,590	.602
RSMX12T	RSMX12T	.7500	2.000	.875	.687	1.312	3.375	7/8-14	1.875	12	55,696	.918
RSMX14T**	RSMX14T**	.8750	2.312	.875	.765	1.375	3.800	1-14	2.375	12	63,096	1.302

MALE ROD ENDS LOAD RATINGS BASED ON NO LUBRICATION FITTING. FOR LOAD RATINGS OF ROD ENDS WITH LUBRICATOR, PLEASE CONTACT THE F.K. ENGINEERING DEPARTMENT.

*A trade mark of E.I. Dupont de Nemours & Co., Inc.

NOTE: FOR GREASE FITTINGS ADD "Z" TO SUFFIX EXAMPLE: RSMXL5Z
**RACE IS 17-PH STAINLESS STEEL. HEAT TREATED /BALL IS 440C STAINLESS STEEL or 52100 steel (heat treated)-Manufacture's Option