[ Back ] [ Home ] [ Next ]

M-SB / F-SB
3-PIECE, COMMERCIAL, SINTERED BRONZE
  MATERIALS
BALL
52100 STEEL         
Rc 56 MIN. HARD
HARD CHROME PLATED
RACE
SINTERED PHOSPHOR BRONZE                 OIL IMPREGNATED
BODY
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED

MALE ROD         ENDS             

 B
DIA.		 D
DIA.		 W
WIDTH		 T
WIDTH		 BALL
DIA.		 A
LGTH		 N
THD.		 C
LGTH		 a
MIS.
ANGLE		 ULT.
STATIC
RADIAL
LOAD
(lbs)		 APPROX.
WEIGHT
(lbs)
RIGHT
HAND
PART NO.		 LEFT
HAND
PART NO.		 +.0025
-.0005		 +.010
-.010		 +.005
-.005		 +.015
-.015		 REF. +.015
-.015		 UNF
3A		 +.062
-.031		 REF.
M3SB ML3SB .1900 .625 .312 .250 .437 1.250 10-32 .750 13 1,174 .03
M4SB ML4SB .2500 .750 .375 .281 .500 1.562 1/4-28 1.000 16 2,168 .04
M5SB ML5SB .3125 .875 .437 .344 .625 1.875 5/16-24 1.250 14 2,796 .07
M6SB ML6SB .3750 1.000 .500 .406 .719 1.938 3/8-24 1.250 12 4,012 .11
M7SB ML7SB .4375 1.125 .562 .437 .812 2.125 7/16-20 1.375 14 4,244 .16
M8SB ML8SB .5000 1.312 .625 .500 .937 2.438 1/2-20 1.500 12 6,700 .25
M10SB ML10SB .6250 1.500 .750 .562 1.125 2.625 5/8-18 1.625 16 7,400 .38
M12SB ML10SB .7500 1.750 .875 .687 1.312 2.875 3/4-16 1.750 14 11,550 .60
MALE ROD END LOAD RATINGS BASED ON A NO LUBRICATING FITTING FOR LOAD RATINGS WITH LUBRICATOR,
PLEASE CONTACT THE FK ENGINEERING DEPARTMENT.
  MATERIALS
BALL
52100 STEEL         
Rc 56 MIN. HARD
HARD CHROME PLATED
RACE
SINTERED PHOSPHOR BRONZE                 OIL IMPREGNATED
BODY
LOW CARBON STEEL
ZINC PLATED
CHROMATE TREATED

FEMALE ROD
          ENDS             

B
DIA.		 D
DIA.		 W
WIDTH		 T
WIDTH		 BALL
DIA.		 A
LGTH		 N
THD.		 C
LGTH		 E
DIA.		 F
FLAT		 a
MIS.
ANGLE		 ULT.
STATIC
RADIAL
LOAD
(lbs)		 APPROX.
WEIGHT
(lbs)
RIGHT
HAND
PART NO.		 LEFT
HAND
PART NO.		 +.0025
-.0005		 +.010
-.010		 +.005
-.005		 +015
-.015		 REF. +.015
-.015		 UNF
2B		 +.062
-.031		 +.010
-.010		 +.010
-.010		 REF.
F3SB FL3SB .1900 .625 .312 .250 .437 1.062 10-32 .500 .406 .312 13 1,624 .04
F4SB FL4SB .2500 .750 .375 .281 .500 1.312 1/4-28 .687 .468 .375 16 2,545 .06
F5SB FL5SB .3125 .875 .437 .344 .625 1.375 5/16-24 .687 .500 .437 14 3,200 .09
F6SB FL6SB .3750 1.000 .500 .406 .719 1.625 3/8-24 .812 .687 .562 12 3,950 .15
F7SB FL7SB .4375 1.125 .562 .437 .812 1.812 7/16-20 .937 .750 .625 14 4,300 .20
F8SB FL8SB .5000 1.312 .625 .500 .937 2.125 1/2-20 1.062 .875 .750 12 6,700 .33
F10SB FL10SB .6250 1.500 .750 .562 1.125 2.500 5/8-18 1.375 1.000 .875 16 7,400 .48
F12SB FL12SB .7500 1.750 .875 .687 1.312 2.875 3/4-16 1.562 1.125 1.000 14 11,550 .72
NOTES: FOR GREASE FITTINGS ADD "Z" TO SUFFIX   EXAMPLE: M6SBZ
            FOR STUDS ADD "Y" TO SUFFIX                  EXAMPLE: FL12SBY